Eavestrough in
Leduc, Alberta.
Seamless aluminum formed at your Leduc address, sized for the roof feeding it, with discharge carried well clear of the foundation. On flat ground, where the water goes matters as much as how it gets there.
Free Eavestrough Estimate
Get your Leduc quote.
Free, no obligation, and priced on your actual Leduc home. We reply the same day.
We come out to your Leduc address, take a proper look at what you actually have, and put a real number in writing. No obligation, no sales pitch, and we get back to you the same day.
Or call (780) 937-1184Eavestrough in Leduc
What Leduc actually needs from a eavestrough job.
Leduc's flatness is a real drainage consideration. On a sloped lot, water leaving a downspout has somewhere obvious to go. On the flat ground much of Leduc sits on, particularly in the newer subdivisions where the landscaping is young and the soil is still settling, a downspout discharging at the foundation has nowhere to send water except down against the wall. Extensions carried well clear of the house, and directed in line with the lot grading rather than onto the neighbouring property, are the whole point of the system here.
June 2026 tested that thoroughly. The Edmonton region took 244 millimetres of rain in June, the wettest since records began in 1914, and about $80 million of insured damage came from flooding in late May and early June before the June 20 to 21 storm added roughly $150 million more. What we found across Leduc afterwards was overwhelmingly a volume problem: five-inch runs fed by two valleys, single downspouts on long runs, and discharge dumping straight into a flowerbed against the foundation.
Freeze-up finishes the story. Any run that holds standing water becomes a solid length of ice through a Leduc January, ice is heavy, and hangers screwed into softened fascia will not hold it. We pitch to the outlets so nothing stands, hang on hidden hangers into sound wood, and tell you if the fascia behind needs attention before we hang anything on it.
About Leduc
Leduc is where Alberta's modern oil industry began: Leduc No. 1 came in on February 13, 1947, and the town went from farming community to boom town almost overnight. It has kept growing since, adding nearly 14 percent to its population in the five years to 2021, and it now sits directly beside Edmonton International Airport and the Nisku Industrial Park. What defines it from a roofing perspective is the ground it sits on, which is about as flat and open as anywhere in the region.
Where We Work
Leduc neighbourhoods we work in.
We have done eavestrough work across Leduc, from the established streets in Corinthia Park, Linsford Park, Willow Park to the newer builds in Southfork, Robinson, West Haven.
Our Standard
What every Leduc eavestrough job includes.
Eavestrough is the least glamorous part of an exterior and the part with the most direct line to your foundation. We form seamless 5-inch and 6-inch aluminum on site, so a run has no joints along its length to work loose through a 60-degree annual temperature swing, hang it on proper hidden hangers into solid fascia, and pitch it so water actually moves rather than standing and freezing.
Seamless, formed on site
Each run is rolled to length at your house, so the only joints are at corners and outlets. Sectional gutter has a seam every ten feet, and every seam is a future leak here.
5-inch and 6-inch K-style
Five-inch handles most homes. Six-inch is the right call for large roof areas, steep pitches that dump water fast, and homes under mature trees.
Correct pitch and sizing
Slope calculated to the outlets so water moves. Standing water in an eavestrough is what freezes, and ice is what pulls a run off the fascia.
Hidden hangers into solid wood
Screwed hangers into sound fascia at proper spacing. If the fascia behind it is rotten we tell you, because hanging new eavestrough on soft wood is money wasted.
Downspouts and discharge
Sized and placed to move volume, with extensions that carry water well clear of the foundation and away from the neighbouring property.
Gutter guards, when they help
Worth it under mature trees and spruce. We will tell you honestly when your lot does not need them rather than adding a line to the quote.
Colour matched
A wide range of pre-finished aluminum colours matched to your fascia, trim and roof, so the eaves read as one detail.
Done with the roof where it makes sense
If the roof is being replaced, doing the eavestrough at the same time costs less than a separate mobilisation later.
Leduc Pricing
What this costs in Leduc.
Real 2026 ranges for the Edmonton region. Your written quote gives you a firm number after we have been on site, because a price without an inspection is a guess.
5-inch seamless aluminum
$8 – $16 / linear ft
The standard for most homes
6-inch oversized
$10 – $18 / linear ft
Large roofs, steep pitch, heavy runoff
Bungalow, complete
$1,500 – $2,800
Roughly 140 – 180 linear feet
Two-storey, complete
$2,200 – $4,200
Roughly 180 – 240 linear feet
Downspouts run $100 to $250 each installed and gutter guards $6 to $12 per linear foot. Steel eavestrough, occasionally specified for heavy snow-slide exposure, runs $14 to $22 per linear foot. For the complete regional breakdown, see our Edmonton roof replacement cost guide.
Permits · City of Leduc
Do you need a permit in Leduc?
Leduc treats a like-for-like re-shingle or re-clad as maintenance, so no building permit is required. A permit is needed where the work alters the structure, changes the roof shape or height, adds floor area, or follows fire or flood damage. Newer Leduc subdivisions frequently carry developer architectural controls on exterior materials and colours, which we work within.
FAQ
Leduc eavestrough questions.
A complete seamless aluminum system on a bungalow, roughly 140 to 180 linear feet, typically runs $1,500 to $2,800. Two-storey homes at 180 to 240 linear feet generally run $2,200 to $4,200. Downspouts are $100 to $250 each installed and gutter guards $6 to $12 per linear foot where a lot actually warrants them.
Often it is part of it. On flat Leduc lots, especially newer ones where the soil is still settling, a downspout discharging close to the house has no natural fall to carry water away. Short extensions look tidy and simply relocate the problem a metre. We look at where each downspout lands relative to the lot grading and extend properly, which is usually the cheapest part of solving a wet-basement complaint.
Less often than in the heavily treed communities. On a newer Southfork or Robinson lot with young landscaping, guards are not earning their money yet. In the older neighbourhoods, where Corinthia Park and Willow Park now have mature trees, they make more sense. We will look at your specific lot and tell you honestly which one you are.
Five-inch handles the runoff from most single-family roofs in this region. Go to six-inch if you have a large roof area draining to few outlets, a steep pitch that moves water fast, valleys dumping onto a short run, or mature trees dropping debris. The material cost difference is small next to the cost of overflow at the foundation.
Usually pitch, sizing or outlet placement rather than blockage. A run that is level or back-pitched holds water, a five-inch run fed by two valleys can simply be undersized, and too few downspouts creates a bottleneck. We measure the roof area draining to each outlet rather than matching whatever was there before.
Under spruce and mature deciduous trees, yes, and they meaningfully reduce cleaning. On an open new-build lot with young landscaping they are largely unnecessary for several years. We would rather tell you to skip them than sell you a line item you do not need yet.
More in Leduc
Everything under one roof.
Roofing in Leduc
From the 1970s and 80s streets in Corinthia Park and Linsford Park to the new two-storeys filling out Southfork and Robinson, we re-roof across Leduc, on some of the most wind-exposed ground in the region..
Roof Repair in Leduc
Wind-lifted shingles, hail from a heavy 2026 storm season, and leaks that need tracing rather than patching.
Siding in Leduc
Seventies and eighties cladding at the end of its life, nineties vinyl gone brittle, and new builds on exposed lots.
Soffit & Fascia in Leduc
Aluminum soffit and fascia with the attic intake genuinely calculated and the eave opened up behind it.
Worth Reading
